MAG 2

Category
Semi-automatic machine to apply magnets and metal plates
video
video
video

MAG 2

SEMI-AUTOMATIC MACHINE TO APPLY MAGNETS AND METAL PLATES

Half-automatic machine to groove board cases and to apply one or two couples of magnets by hot glue – board case feeding by hand – magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.

MAG 2/S: Delivery of the processed products on the back side of the machine – Possibility to apply more than 2 couples of magnets per cycle

MAG 2/SR: Including the application of one ribbon (loop) onto the board case

Technical features

Used materials:

– grey board with thickness 1,5 mm up to 4 mm
– magnets with diam. min. 9,5 mm  max 15 mm /thickness 1/1,5/2 mm

Board width: min. 270 mm – max 1200 mm

Magnet distance: min. 240 mm – max 900 mm

Production capacity:

– 14 cycles (with 2 magnets)/minute

– 8 cycles (with 4 magnets)/minute

Power required: 6,2 Kw

Pneumatic consumption: 250 NL/minute (6 bar)

Overall dimensions: L=2500mm; W=2500mm; H=2100mm;

Download

Graphicloads-Filetype-Pdf

    Request an offer